Anmelden Register

  • 0 Bewertungen - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
z-push mit IMAP
Ich versuch hier verzweifelt z-push mit IMAP Backend ein zu richten. Scheint auch eigentlich zu funktionieren. Zumindest, wenn man glauben darf. Sieht auf meinem Zarafa Server auch nicht anders aus.
Bei der Eingabe der Zugangsdaten, die man, sofern man die E-Mails bei mir Hostet, auch unter eingibt, scheint er die auch zu fressen und zeigt einem die von z-push gewohnte "GET not supported" Seite an.

Die Config selbst ist soweit fast Standard:
*  Default settings
    // Defines the default time zone, change e.g. to "Europe/London" if necessary
    define('TIMEZONE', 'Europe/Berlin');

    // Defines the base path on the server
    define('BASE_PATH', dirname($_SERVER['SCRIPT_FILENAME']). '/');

    // Try to set unlimited timeout
    define('SCRIPT_TIMEOUT', 0);

    // When accessing through a proxy, the "X-Forwarded-For" header contains the original remote IP
    define('USE_X_FORWARDED_FOR_HEADER', false);

    // When using client certificates, we can check if the login sent matches the owner of the certificate.
    // This setting specifies the owner parameter in the certificate to look at.

*  Default FileStateMachine settings
    define('STATE_DIR', '/var/customers/webs/kromonos/z-push/state/');

*  Logging settings
*  Possible LOGLEVEL and LOGUSERLEVEL values are:
*  LOGLEVEL_OFF            - no logging
*  LOGLEVEL_FATAL          - log only critical errors
*  LOGLEVEL_ERROR          - logs events which might require corrective actions
*  LOGLEVEL_WARN           - might lead to an error or require corrective actions in the future
*  LOGLEVEL_INFO           - usually completed actions
*  LOGLEVEL_DEBUG          - debugging information, typically only meaningful to developers
*  LOGLEVEL_WBXML          - also prints the WBXML sent to/from the device
*  LOGLEVEL_DEVICEID       - also prints the device id for every log entry
*  LOGLEVEL_WBXMLSTACK     - also prints the contents of WBXML stack
*  The verbosity increases from top to bottom. More verbose levels include less verbose
*  ones, e.g. setting to LOGLEVEL_DEBUG will also output LOGLEVEL_FATAL, LOGLEVEL_ERROR,
*  LOGLEVEL_WARN and LOGLEVEL_INFO level entries.
    define('LOGFILEDIR', '/var/customers/logs/');
    define('LOGFILE', LOGFILEDIR . 'z-push.log');
    define('LOGERRORFILE', LOGFILEDIR . 'z-push-error.log');
    define('LOGAUTHFAIL', false);

    // To save e.g. WBXML data only for selected users, add the usernames to the array
    // The data will be saved into a dedicated file per user in the LOGFILEDIR
    // Users have to be encapusulated in quotes, several users are comma separated, like:
    //   $specialLogUsers = array('info[at]', 'myusername');
    $specialLogUsers = array();

    // Location of the trusted CA, e.g. '/etc/ssl/certs/EmailCA.pem'
    // Uncomment and modify the following line if the validation of the certificates fails.
    // define('CAINFO', '/etc/ssl/certs/EmailCA.pem');

*  Mobile settings
    // Device Provisioning
    define('PROVISIONING', true);

    // This option allows the 'loose enforcement' of the provisioning policies for older
    // devices which don't support provisioning (like WM 5 and HTC Android Mail) - dw2412 contribution
    // false (default) - Enforce provisioning for all devices
    // true - allow older devices, but enforce policies on devices which support it
    define('LOOSE_PROVISIONING', false);

    // Default conflict preference
    // Some devices allow to set if the server or PIM (mobile)
    // should win in case of a synchronization conflict
    //   SYNC_CONFLICT_OVERWRITE_SERVER - Server is overwritten, PIM wins
    //   SYNC_CONFLICT_OVERWRITE_PIM    - PIM is overwritten, Server wins (default)

    // Global limitation of items to be synchronized
    // The mobile can define a sync back period for calendar and email items
    // For large stores with many items the time period could be limited to a max value
    // If the mobile transmits a wider time period, the defined max value is used
    // Applicable values:
    //   SYNC_FILTERTYPE_ALL (default, no limitation)

    // Interval in seconds before checking if there are changes on the server when in Ping.
    // It means the highest time span before a change is pushed to a mobile. Set it to
    // a higher value if you have a high load on the server.
    define('PING_INTERVAL', 30);

    // Interval in seconds to force a re-check of potentially missed notifications when
    // using a changes sink. Default are 300 seconds (every 5 min).
    // This can also be disabled by setting it to false
    define('SINK_FORCERECHECK', 300);

    // Set the fileas (save as) order for contacts in the webaccess/webapp/outlook.
    // It will only affect new/modified contacts on the mobile which then are synced to the server.
    // Possible values are:
    // SYNC_FILEAS_FIRSTLAST    - fileas will be "Firstname Middlename Lastname"
    // SYNC_FILEAS_LASTFIRST    - fileas will be "Lastname, Firstname Middlename"
    // SYNC_FILEAS_COMPANYONLY  - fileas will be "Company"
    // SYNC_FILEAS_COMPANYLAST  - fileas will be "Company (Lastname, Firstname Middlename)"
    // SYNC_FILEAS_COMPANYFIRST - fileas will be "Company (Firstname Middlename Lastname)"
    // SYNC_FILEAS_LASTCOMPANY  - fileas will be "Lastname, Firstname Middlename (Company)"
    // SYNC_FILEAS_FIRSTCOMPANY - fileas will be "Firstname Middlename Lastname (Company)"
    // The company-fileas will only be set if a contact has a company set. If one of
    // company-fileas is selected and a contact doesn't have a company set, it will default
    // to SYNC_FILEAS_FIRSTLAST or SYNC_FILEAS_LASTFIRST (depending on if last or first
    // option is selected for company).
    // If SYNC_FILEAS_COMPANYONLY is selected and company of the contact is not set
    // SYNC_FILEAS_LASTFIRST will be used

    // Amount of items to be synchronized per request
    // Normally this value is requested by the mobile. Common values are 5, 25, 50 or 100.
    // Exporting too much items can cause mobile timeout on busy systems.
    // Z-Push will use the lowest value, either set here or by the mobile.
    // default: 100 - value used if mobile does not limit amount of items
    define('SYNC_MAX_ITEMS', 100);

    // The devices usually send a list of supported properties for calendar and contact
    // items. If a device does not includes such a supported property in Sync request,
    // it means the property's value will be deleted on the server.
    // However some devices do not send a list of supported properties. It is then impossible
    // to tell if a property was deleted or it was not set at all if it does not appear in Sync.
    // This parameter defines Z-Push behaviour during Sync if a device does not issue a list with
    // supported properties.
    // See also
    // Possible values:
    // false - do not unset properties which are not sent during Sync (default)
    // true  - unset properties which are not sent during Sync
    define('UNSET_UNDEFINED_PROPERTIES', false);

    // ActiveSync specifies that a contact photo may not exceed 48 KB. This value is checked
    // in the semantic sanity checks and contacts with larger photos are not synchronized.
    // This limitation is not being followed by the ActiveSync clients which set much bigger
    // contact photos. You can override the default value of the max photo size.
    // default: 49152 - 48 KB default max photo size in bytes

    // Over the WebserviceUsers command it is possible to retrieve a list of all
    // known devices and users on this Z-Push system. The authenticated user needs to have
    // admin rights and a public folder must exist.
    // In multicompany environments this enable an admin user of any company to retrieve
    // this full list, so this feature is disabled by default. Enable with care.

*  Backend settings
    // the backend data provider
    define('BACKEND_PROVIDER', 'BackendIMAP');

*  Search provider settings
*  Alternative backend to perform SEARCH requests (GAL search)
*  By default the main Backend defines the preferred search functionality.
*  If set, the Search Provider will always be preferred.
*  Use 'BackendSearchLDAP' to search in a LDAP directory (see backend/searchldap/config.php)
    define('SEARCH_PROVIDER', '');
    // Time in seconds for the server search. Setting it too high might result in timeout.
    // Setting it too low might not return all results. Default is 10.
    define('SEARCH_WAIT', 10);
    // The maximum number of results to send to the client. Setting it too high
    // might result in timeout. Default is 10.
    define('SEARCH_MAXRESULTS', 10);

*  Synchronize additional folders to all mobiles
*  With this feature, special folders can be synchronized to all mobiles.
*  This is useful for e.g. global company contacts.
*  This feature is supported only by certain devices, like iPhones.
*  Check the compatibility list for supported devices:
*  To synchronize a folder, add a section setting all parameters as below:
*      store:      the ressource where the folder is located.
*                  Zarafa users use 'SYSTEM' for the 'Public Folder'
*      folderid:   folder id of the folder to be synchronized
*      name:       name to be displayed on the mobile device
*      type:       supported types are:
*                      SYNC_FOLDER_TYPE_USER_CONTACT
*                      SYNC_FOLDER_TYPE_USER_TASK
*                      SYNC_FOLDER_TYPE_USER_MAIL
*  Additional notes:
*  - on Zarafa systems use backend/zarafa/listfolders.php script to get a list
*    of available folders
*  - all Z-Push users must have full writing permissions (secretary rights) so
*    the configured folders can be synchronized to the mobile
*  - this feature is only partly suitable for multi-tenancy environments,
*    as ALL users from ALL tenents need access to the configured store & folder.
*    When configuring a public folder, this will cause problems, as each user has
*    a different public folder in his tenant, so the folder are not available.

*  - changing this configuration could cause HIGH LOAD on the system, as all
*    connected devices will be updated and load the data contained in the
*    added/modified folders.

    $additionalFolders = array(
        // demo entry for the synchronization of contacts from the public folder.
        // uncomment (remove '/*' '*/') and fill in the folderid
            'store'     => "SYSTEM",
            'folderid'  => "",
            'name'      => "Public Contacts",
            'type'      => SYNC_FOLDER_TYPE_USER_CONTACT,


Die IMAP Config auch:
// ************************
//  BackendIMAP settings
// ************************

// Defines the server to which we want to connect
define('IMAP_SERVER', 'localhost');

// connecting to default port (143)
define('IMAP_PORT', 143);

// best cross-platform compatibility (see for options)
define('IMAP_OPTIONS', '/novalidate-cert');

// overwrite the "from" header if it isn't set when sending emails
// options: 'username'    - the username will be set (usefull if your login is equal to your emailaddress)
//        'domain'    - the value of the "domain" field is used
//        '' - the username is used and the given string will be appended
define('IMAP_DEFAULTFROM', '');

// copy outgoing mail to this folder. If not set z-push will try the default folders
define('IMAP_SENTFOLDER', '');

// forward messages inline (default false - as attachment)
define('IMAP_INLINE_FORWARD', false);

// use imap_mail() to send emails (default) - if false mail() is used
define('IMAP_USE_IMAPMAIL', true);

/* BEGIN fmbiete's contribution r1527, ZP-319 */
// list of folders we want to exclude from sync. Names, or part of it, separated by |
// example: dovecot.sieve|archive|spam
/* END fmbiete's contribution r1527, ZP-319 */


Jemand noch Ideen?

OK, habs Big Grin
z-push bringt nicht dir korrekte imap config mit. Das hier wäre allerdings die richtige:
define('IMAP_SERVER', 'localhost');
define('IMAP_PORT', 143);
define('IMAP_OPTIONS', '/novalidate-cert/notls/norsh');
define('IMAP_DEFAULTFROM', '');
define('IMAP_INLINE_FORWARD', true);
define('IMAP_USE_IMAPMAIL', true);
define('IMAP_SENTFOLDER', 'Sent');
define('IMAP_DRAFTSFOLDER', 'Draft');
define('IMAP_USE_FETCHHEADER', true);

Zumindest funktioniert es so mit dem Android Mail Client. Windows Phone 8.1 weigert sich mit dem Fehler 80072F7D. Andere Systeme kann ich nicht testen.

Hier die Lösung:
"Ich mag keine irrelevanten Konversationen." - VOY: 7of9
[Bild: signatur.jpg]

Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste
This forum uses Lukasz Tkacz MyBB addons.